Skip to main content

QPS Dubai

GI & MI Fittings Supplier in Dubai, UAE 

QPS supplies a comprehensive range of Galvanised Iron (GI) and Malleable Iron (MI) pipe fittings for plumbing, water distribution, HVAC, fire protection, industrial utilities and general piping applications. Our product range includes threaded elbows, tees, couplings, unions, reducers, bushings, plugs, caps and related fittings, available in galvanised and black finishes according to project requirements. With sourcing support for applicable international standards, connection sizes and thread specifications, QPS helps contractors, MEP companies, fabricators and industrial procurement teams obtain suitable fitting solutions.

From commercial construction and building services to industrial facilities and infrastructure projects, QPS supports GI & MI fitting enquiries across Dubai, the UAE, Saudi Arabia and the wider GCC.

Galvanised malleable iron threaded 90-degree elbow pipe fitting supplied by QPS Dubai UAE.

OUR GI & MI FITTINGS RANGETypes of GI & MI Fittings We Supply

QPS supports a wide selection of galvanised and malleable iron fittings for joining, redirecting, branching, reducing and closing threaded piping systems.

Our product range includes standard and reducing configurations in various nominal sizes, thread types and surface finishes to meet applicable project specifications.

GI & MI Elbows

90° and 45° threaded elbows for directional changes in suitable piping systems.

Equal & Reducing Tees

Three-way threaded fittings for connecting equal or differently sized branch lines.

Couplings & Sockets

Straight threaded connections, including equal and reducing sockets for compatible pipes.

GI & MI Unions

Detachable threaded fittings used where pipe sections or equipment connections may require disassembly.

Reducing Bushings

Threaded fittings for transitioning between compatible nominal connection sizes.

Caps & Plugs

Threaded closures for suitable pipe ends, fittings, maintenance points and unused openings.

GI Pipe Nipples

Short galvanised steel pipe connectors with threaded ends for specified piping arrangements.

Crosses & Special Fittings

Four-way fittings and specialised configurations for project-specific piping requirements.

PRODUCT SELECTIONGI vs MI Fittings — Understanding the Difference

Reliable flange sealing begins with selecting a gasket compatible with the specified flange design, operating conditions and sealing arrangement.

QPS supports gasket enquiries involving Raised Face, Flat Face and Ring Type Joint flange configurations, including material selection, dimensional compatibility, sealing construction and technical documentation requirements.

Customers can submit flange schedules, gasket specifications, piping classes or equipment datasheets to help identify suitable sourcing options.

GI — Galvanised Fittings

GI is a commercial description commonly used for zinc-coated iron or steel piping products. The galvanised coating provides corrosion protection, while the underlying fitting material depends on the specified product.

MI — Malleable Iron Fittings

MI refers to malleable cast iron material. Threaded malleable iron fittings may be supplied in black or hot-dip galvanised finishes, depending on the required specification.

Feature

GI Fittings

MI Fittings

Main description

Galvanised coating / product category

Malleable cast iron material

Typical appearance

Silver-grey zinc coating

Black or galvanised

Connection

Commonly threaded

Commonly threaded

Typical products

Elbows, tees, sockets, nipples

Elbows, tees, unions, bushings

Selection factor

Base material, coating, thread

Material standard, thread, finish

CONNECTION SELECTIONThreaded Connection Compatibility

Selecting the correct thread specification is essential for industrial and building-service pipe connections.

QPS supports enquiries for threaded fittings with applicable BSP/ISO and NPT thread configurations. Customers should confirm the required thread form, nominal connection size, sealing arrangement and mating pipe specification before ordering.

Threaded components must be selected according to the approved piping specification and manufacturer’s technical documentation.

BSP / ISO Threaded Fittings

Common in many building-services and utility systems. Different BSP thread forms and sealing methods must be distinguished.

NPT Threaded Fittings

Used in applications specifying the American tapered pipe-thread system, subject to appropriate connection and sealing requirements.

Requirement

BSP / ISO

NPT

Common references

ISO 7-1, EN 10226

ASME B1.20.1

Thread angle

55° for Whitworth forms

60°

Sealing

Depends on thread form

Pressure-tight threaded joint with suitable sealing method

Interchangeability

Not automatically compatible with NPT

Not automatically compatible with BSP

MATERIAL EXPERTISEMaterials & Surface Finishes

QPS supports threaded GI and MI fitting requirements for projects where material compatibility, surface protection and connection specifications are important.

Our team can review galvanised and black malleable iron fittings, galvanised steel pipe nipples and related threaded components according to the required nominal size, applicable product standard, thread type and operating conditions.

Product material, coating and suitability depend on the manufacturer’s specifications and the intended application.

Category

Material / Finish

Malleable Iron

Malleable cast iron, black or galvanised

Galvanised Fittings

Zinc-coated fittings with specified base material

Black Iron Fittings

Uncoated or black-finished malleable iron

GI Steel Nipples

Galvanised carbon steel pipe nipples

Threaded Accessories

Compatible steel or iron threaded components

Special Requirements

Selected finishes and material combinations, subject to sourcing

TECHNICAL CAPABILITIESTechnical Specifications — GI & MI Fittings

Malleable Iron Threaded Fittings

Parameter

Technical Information

Material

Malleable cast iron

Products

Elbows, tees, sockets, unions, bushings, caps

Nominal sizes

Commonly ½″–4″; extended options product-dependent

Standard scope

EN 10242 / ISO 49: ⅛″–6″

Surface finish

Black / Hot-dip galvanised

Threads

ISO 7-1 or specified alternatives

Pressure rating

Manufacturer and product-class dependent

Galvanised Fittings & Pipe Nipples

Parameter

Technical Information

Base material

Malleable iron or applicable steel

Finish

Zinc-coated / galvanised

Product types

Elbows, tees, sockets, nipples, reducers

Connection

Threaded

Threads

BSP-compatible ISO threads or specified NPT

Dimensions

Based on applicable product specification

Availability

Subject to product

Relevant Standards

Standard

Application

EN 10242:2025

Threaded malleable cast iron fittings

ISO 49

Malleable cast iron fittings threaded to ISO 7-1

ASME B16.3

Malleable iron threaded fittings

ASME B1.20.1

NPT thread requirements

ISO 7-1

Pressure-tight threaded pipe joints

EN 10226-1

Pipe threads where pressure-tight joints are made on threads

EN 10255

Non-alloy steel tubes suitable for welding and threading

IS 1239

Applicable steel tube and fitting requirements by part

WHY QPSWhy Source GI & MI Fittings from QPS?

At QPS, we understand that GI and MI fitting procurement depends on accurate connection sizes, suitable materials, compatible thread types, surface finishes and applicable technical specifications.

Our sourcing approach supports contractors, MEP companies, industrial maintenance teams and procurement professionals with standard and project-specific fitting requirements.

Whether you need a selection of threaded connectors or a complete multi-item piping material package, QPS supports enquiry review and supply coordination across the UAE and GCC.

Elbows, tees, unions, couplings, bushings, plugs and caps.

Galvanised and black fittings, subject to specification.

Review of ISO/BSP and NPT connection requirements.

Product dimensions, material and relevant standards review.

Support for BOQ, MTO and multi-item material schedules.

Procurement coordination for UAE, KSA and regional projects.

INDUSTRIES WE SERVEIndustries & Applications

Commercial & Residential Plumbing

Threaded fittings for suitable building water and plumbing installations.

Fire Protection Systems

Specified threaded fittings for compatible fire sprinkler and protection piping.

HVAC & Mechanical Services

Fittings for selected heating, cooling and utility piping applications.

Water Treatment & Utilities

Connections for appropriate plant utilities and water distribution systems.

Agriculture & Irrigation

Threaded connections for suitable irrigation and water supply networks.

Industrial Facilities & MEP

Maintenance and project-based threaded fitting requirements.

FAQFrequently Asked Questions

What types of GI & MI fittings does QPS supply in Dubai, UAE?

Include fitting type, size, class, grade, thread/end type, quantity and technical standard.

Include fitting type, size, class, grade, thread/end type, quantity and technical standard.

Include fitting type, size, class, grade, thread/end type, quantity and technical standard.

Include fitting type, size, class, grade, thread/end type, quantity and technical standard.

partnersTrusted collaborators with QPS