
QPS supplies a comprehensive range of industrial Hammer Unions, also known as Wing Unions, for oilfield flow lines, drilling operations, well servicing, cementing and demanding fluid-transfer applications. Our product range includes standard and high-pressure Hammer Union configurations, including Figures 100, 200, 206, 400, 602, 1002 and 1502, with threaded and butt-weld connection options according to the selected design. Supporting oil & gas operators, drilling contractors, well-service companies and industrial procurement teams, QPS provides Hammer Union sourcing solutions across Dubai, the UAE, Saudi Arabia and the wider GCC.
QPS supports a broad range of Hammer Union requirements for temporary and permanent piping arrangements, flow lines, well-servicing equipment and industrial fluid-transfer systems.
Different Hammer Union figure numbers identify specific designs, pressure ratings and sealing arrangements. Product selection must be based on the applicable manufacturer specification, nominal size, end connection and operating conditions.

Commonly rated for 1,000 PSI cold working pressure in specified standard-service applications.

A 2,000 PSI class configuration commonly used for compatible oilfield and fluid-transfer connections.

A 2,000 PSI figure that typically incorporates an additional elastomer sealing arrangement.

Heavy-duty unions with ratings that vary by nominal size and manufacturer design, including 4,000 PSI configurations.

A high-pressure union configuration commonly associated with a 6,000 PSI working-pressure rating and specified sealing components.

A high-pressure union family with 10,000 PSI configurations, subject to size and service-specific ratings.

A high-pressure oilfield connection commonly specified for compatible 15,000 PSI standard-service applications.

Specialised configurations for specified H₂S-containing environments, requiring appropriate materials, hardness control and documentation.
Hammer Unions provide a practical connection system for piping and flow-line equipment that requires regular assembly, disconnection or maintenance.
The assembly typically uses a male sub, female sub and wing nut, with the sealing arrangement determined by the union figure and manufacturer design.
For safe operation, mating components must be compatible in figure designation, nominal size, pressure rating, service classification and manufacturer-approved interchangeability. Components from different union figures must not be mixed.

A machined connection component forming part of the mating assembly.

The mating component incorporating the appropriate sealing interface.

A lugged fastening component used to secure the compatible union assembly.
QPS supports Hammer Union enquiries involving forged steel constructions, specified material grades and suitable sealing components for industrial and oilfield service.
Material requirements are reviewed according to the union figure, working-pressure rating, operating temperature, fluid characteristics and applicable project specifications.
For specialised applications, including sour-service environments, additional material, hardness, sealing and inspection requirements may apply.
Material Category | Common Material References |
|---|---|
Carbon Steel Forgings | ASTM A105 / A105N, where applicable |
Low-Temperature Steel | ASTM A350 LF2 |
Alloy Steel | Selected chromium-molybdenum and high-strength alloy steel grades |
Stainless Steel | ASTM A182 F304 / F316, where supported |
Sealing Elements | Nitrile rubber (NBR), other compatible elastomers |
Special Service | Materials selected for applicable H₂S/sour-service requirements |
Representative Hammer Union Pressure Ratings
Union Figure | Typical Standard-Service CWP |
|---|---|
Figure 100 | 1,000 PSI |
Figure 200 | 2,000 PSI |
Figure 206 | 2,000 PSI |
Figure 400 | Up to 4,000 PSI |
Figure 602 | 6,000 PSI |
Figure 1002 | Up to 10,000 PSI |
Figure 1502 | 15,000 PSI |
Available Connection Arrangements
Connection | Description |
|---|---|
Line Pipe Thread | Threaded connection, where supported by the union figure |
Butt Weld | Weld-end connection for compatible piping |
Socket Weld | Select low-pressure or specialised designs |
Special End Connections | Manufacturer/project-specific configurations |
General Technical Requirements
Parameter | Specification |
|---|---|
Product | Hammer Union / Wing Union |
Published QPS size range | 1″–12″ |
Published maximum pressure | 15,000 PSI CWP |
Construction | Male Sub, Female Sub, Wing Nut |
Materials | Forged steel and specified alloys |
Service | Standard / Sour Service |
Seals | Metal-to-metal or specified elastomer |
Inspection | Product-specific testing and documentation |
Standard / Reference | Application |
|---|---|
API Specification 6A | Wellhead and tree equipment, where applicable to the supplied product |
API Specification 16C | Choke and kill equipment, where applicable |
NACE MR0175 / ISO 15156 | Material selection for applicable H₂S-containing oil and gas production environments |
ASME B1.20.1 | General-purpose inch pipe threads, where specified |
Manufacturer Drawings | Union figure, dimensions, components and pressure rating |
Inspection Documentation | Material traceability and relevant product test certificates |

Used with compatible threaded pipe or flow-line arrangements where the specified union figure and service conditions permit threaded connections.

Designed for permanent welded attachment to compatible piping or flow-line components while retaining a separable union connection.
Parameter | Threaded | Butt Weld |
|---|---|---|
Connection | Threaded pipe joint | Welded pipe joint |
Installation | Compatible threads | Approved welding procedure |
Figure Availability | Figure-dependent | Figure-dependent |
Selection Basis | Thread standard, pressure, service | Pipe grade, weld end, pressure, service |
Main Consideration | Thread compatibility | Weld and material compatibility |
Hammer Union specifications must consider the fluid being transported and the expected operating conditions.
Standard-service unions are selected according to their specified working-pressure rating, materials, dimensions and sealing arrangement.
For environments involving hydrogen sulphide (H₂S), sour-service materials and additional requirements may apply under relevant industry standards, including NACE MR0175 / ISO 15156.
QPS can review enquiries for standard and specialised service configurations based on manufacturer availability and the purchaser’s approved technical specifications.
At QPS, we understand that Hammer Union procurement requires accurate figure identification, compatible connection types, appropriate working-pressure ratings and application-specific material requirements.
Our team supports industrial buyers, oilfield contractors and procurement professionals with standard and specialised Hammer Union enquiries, including review of technical schedules, equipment requirements and manufacturer specifications.
From individual replacement unions to larger flow-line material packages, QPS supports sourcing and supply coordination for customers across the UAE, Saudi Arabia and the GCC.
Sourcing enquiries involving standard and high-pressure figure designs.
Threaded and butt-weld union configurations.
Figure, pressure, size, seals and service compatibility.
Forged steel and specialised material enquiries.
MTO, BOQ, piping schedules and bulk industrial enquiries.
Commercial and delivery coordination across the UAE and GCC.

Reinforced branch connections for processing facilities, pipeline systems and industrial piping.

Compatible connection arrangements for drilling and well-support activities.

Temporary and specialised well-service flow-line arrangements.

Specified hammer union connections for oilfield cementing lines.

Quick-connection systems for compatible industrial fluid applications.

Project procurement for skids, manifolds and related flow-line equipment.
It joins compatible male and female connection components using a threaded union nut and specified sealing arrangement.
No. Their ends, dimensional interfaces and welding requirements differ; select according to the approved system.
Do not assume a direct or universal mapping. Ratings vary with the actual manufacturer, figure design and service classification.
Exact figure, size, manufacturer/system, pressure rating, service, end connection, material and required testing.
WhatsApp us