
QPS supplies a comprehensive range of Galvanised Iron (GI) and Malleable Iron (MI) pipe fittings for plumbing, water distribution, HVAC, fire protection, industrial utilities and general piping applications. Our product range includes threaded elbows, tees, couplings, unions, reducers, bushings, plugs, caps and related fittings, available in galvanised and black finishes according to project requirements. With sourcing support for applicable international standards, connection sizes and thread specifications, QPS helps contractors, MEP companies, fabricators and industrial procurement teams obtain suitable fitting solutions.
From commercial construction and building services to industrial facilities and infrastructure projects, QPS supports GI & MI fitting enquiries across Dubai, the UAE, Saudi Arabia and the wider GCC.
QPS supports a wide selection of galvanised and malleable iron fittings for joining, redirecting, branching, reducing and closing threaded piping systems.
Our product range includes standard and reducing configurations in various nominal sizes, thread types and surface finishes to meet applicable project specifications.

90° and 45° threaded elbows for directional changes in suitable piping systems.

Three-way threaded fittings for connecting equal or differently sized branch lines.

Straight threaded connections, including equal and reducing sockets for compatible pipes.

Detachable threaded fittings used where pipe sections or equipment connections may require disassembly.

Threaded fittings for transitioning between compatible nominal connection sizes.

Threaded closures for suitable pipe ends, fittings, maintenance points and unused openings.

Short galvanised steel pipe connectors with threaded ends for specified piping arrangements.

Four-way fittings and specialised configurations for project-specific piping requirements.
Reliable flange sealing begins with selecting a gasket compatible with the specified flange design, operating conditions and sealing arrangement.
QPS supports gasket enquiries involving Raised Face, Flat Face and Ring Type Joint flange configurations, including material selection, dimensional compatibility, sealing construction and technical documentation requirements.
Customers can submit flange schedules, gasket specifications, piping classes or equipment datasheets to help identify suitable sourcing options.

GI is a commercial description commonly used for zinc-coated iron or steel piping products. The galvanised coating provides corrosion protection, while the underlying fitting material depends on the specified product.

MI refers to malleable cast iron material. Threaded malleable iron fittings may be supplied in black or hot-dip galvanised finishes, depending on the required specification.
Feature | GI Fittings | MI Fittings |
|---|---|---|
Main description | Galvanised coating / product category | Malleable cast iron material |
Typical appearance | Silver-grey zinc coating | Black or galvanised |
Connection | Commonly threaded | Commonly threaded |
Typical products | Elbows, tees, sockets, nipples | Elbows, tees, unions, bushings |
Selection factor | Base material, coating, thread | Material standard, thread, finish |
Selecting the correct thread specification is essential for industrial and building-service pipe connections.
QPS supports enquiries for threaded fittings with applicable BSP/ISO and NPT thread configurations. Customers should confirm the required thread form, nominal connection size, sealing arrangement and mating pipe specification before ordering.
Threaded components must be selected according to the approved piping specification and manufacturer’s technical documentation.

Common in many building-services and utility systems. Different BSP thread forms and sealing methods must be distinguished.

Used in applications specifying the American tapered pipe-thread system, subject to appropriate connection and sealing requirements.
Requirement | BSP / ISO | NPT |
|---|---|---|
Common references | ISO 7-1, EN 10226 | ASME B1.20.1 |
Thread angle | 55° for Whitworth forms | 60° |
Sealing | Depends on thread form | Pressure-tight threaded joint with suitable sealing method |
Interchangeability | Not automatically compatible with NPT | Not automatically compatible with BSP |
QPS supports threaded GI and MI fitting requirements for projects where material compatibility, surface protection and connection specifications are important.
Our team can review galvanised and black malleable iron fittings, galvanised steel pipe nipples and related threaded components according to the required nominal size, applicable product standard, thread type and operating conditions.
Product material, coating and suitability depend on the manufacturer’s specifications and the intended application.
Category | Material / Finish |
|---|---|
Malleable Iron | Malleable cast iron, black or galvanised |
Galvanised Fittings | Zinc-coated fittings with specified base material |
Black Iron Fittings | Uncoated or black-finished malleable iron |
GI Steel Nipples | Galvanised carbon steel pipe nipples |
Threaded Accessories | Compatible steel or iron threaded components |
Special Requirements | Selected finishes and material combinations, subject to sourcing |
Malleable Iron Threaded Fittings
Parameter | Technical Information |
|---|---|
Material | Malleable cast iron |
Products | Elbows, tees, sockets, unions, bushings, caps |
Nominal sizes | Commonly ½″–4″; extended options product-dependent |
Standard scope | EN 10242 / ISO 49: ⅛″–6″ |
Surface finish | Black / Hot-dip galvanised |
Threads | ISO 7-1 or specified alternatives |
Pressure rating | Manufacturer and product-class dependent |
Galvanised Fittings & Pipe Nipples
Parameter | Technical Information |
|---|---|
Base material | Malleable iron or applicable steel |
Finish | Zinc-coated / galvanised |
Product types | Elbows, tees, sockets, nipples, reducers |
Connection | Threaded |
Threads | BSP-compatible ISO threads or specified NPT |
Dimensions | Based on applicable product specification |
Availability | Subject to product |
Relevant Standards
Standard | Application |
|---|---|
EN 10242:2025 | Threaded malleable cast iron fittings |
ISO 49 | Malleable cast iron fittings threaded to ISO 7-1 |
ASME B16.3 | Malleable iron threaded fittings |
ASME B1.20.1 | NPT thread requirements |
ISO 7-1 | Pressure-tight threaded pipe joints |
EN 10226-1 | Pipe threads where pressure-tight joints are made on threads |
EN 10255 | Non-alloy steel tubes suitable for welding and threading |
IS 1239 | Applicable steel tube and fitting requirements by part |
At QPS, we understand that GI and MI fitting procurement depends on accurate connection sizes, suitable materials, compatible thread types, surface finishes and applicable technical specifications.
Our sourcing approach supports contractors, MEP companies, industrial maintenance teams and procurement professionals with standard and project-specific fitting requirements.
Whether you need a selection of threaded connectors or a complete multi-item piping material package, QPS supports enquiry review and supply coordination across the UAE and GCC.
Elbows, tees, unions, couplings, bushings, plugs and caps.
Galvanised and black fittings, subject to specification.
Review of ISO/BSP and NPT connection requirements.
Product dimensions, material and relevant standards review.
Support for BOQ, MTO and multi-item material schedules.
Procurement coordination for UAE, KSA and regional projects.

Threaded fittings for suitable building water and plumbing installations.

Specified threaded fittings for compatible fire sprinkler and protection piping.

Fittings for selected heating, cooling and utility piping applications.

Connections for appropriate plant utilities and water distribution systems.

Threaded connections for suitable irrigation and water supply networks.

Maintenance and project-based threaded fitting requirements.
Include fitting type, size, class, grade, thread/end type, quantity and technical standard.
Include fitting type, size, class, grade, thread/end type, quantity and technical standard.
Include fitting type, size, class, grade, thread/end type, quantity and technical standard.
Include fitting type, size, class, grade, thread/end type, quantity and technical standard.
WhatsApp us