
QPS supports enquiries for carbon steel, stainless steel and specialised industrial flanges, including large-diameter Weld Neck, Blind, Slip-On and Ring Type Joint configurations. Our approach prioritises correct dimensional standards, pressure class, flange face, grade and matching pipe requirements.
Flanges create removable or welded connections between pipe sections, equipment and valves. Correct selection depends on much more than nominal diameter: the mating face, gasket, bolt circle, pipe bore and pressure-temperature rating must be compatible. For standard dimensions, ASME B16.5 covers NPS 1/2–24 while ASME B16.47 addresses specified large-diameter flanges NPS 26–60. Sizes beyond these ranges require another suitable specification or approved custom design.

Designed with a tapered hub for butt-weld connections, commonly selected for demanding pressure and temperature conditions.

Designed to fit over the pipe before welding, used in appropriate low- and moderate-duty piping applications.

Used to close or isolate piping ends, nozzles and equipment connections for specified operating conditions.

Provide socket-type welded connections, commonly used in suitable small-bore industrial piping systems.

Connect to compatible threaded pipes without flange-to-pipe welding, subject to piping design requirements.

Loose backing flanges used with compatible stub ends.

Raised Face and Ring Type Joint options selected with matching gaskets and mating
QPS supports flange requirements in material grades selected for strength, pressure-temperature performance, low-temperature service and corrosion resistance.
Our team can review project material specifications, piping classes, technical drawings and procurement documentation to identify suitable flange sourcing options, including standard and specialised material grades subject to availability.
Material families | Carbon steel ASTM A105/A105N, ASTM A350 LF2; stainless ASTM A182 F304/F316 and other specified grades. |
Dimensional standards | ASME B16.5; ASME B16.47 Series A/B; EN 1092-1 where specified. |
Published catalogue range | Brochure references 1/2–120 in. / DN15–DN3000 overall; standard and custom ranges must be separated. |
Pressure classes | Class 150, 300, 600, 900, 1500 and 2500 where applicable to standard and size. |
Flange faces | Raised Face (RF); Ring Type Joint (RTJ); flat/plain face as specified. |
Type | Typical connection / purpose |
Weld Neck | Butt-weld flange with tapered hub |
Slip-On | Fit over pipe with specified fillet welds |
Blind | Solid piping or equipment closure |
Socket Weld | Socket end for suitably designed small-bore service |
Threaded | Threaded piping connection where approved |
Lap Joint | Backing flange used with compatible stub end |
Specification | Common reference |
Carbon steel | ASTM A105/A105N, ASTM A350 LF2 |
Stainless steel | ASTM A182 F304/F304L, F316/F316L |
Standard size flanges | ASME B16.5 (NPS ½–24) |
Large diameter | ASME B16.47 Series A/B (NPS 26–60) |
Other systems | EN 1092-1 / approved project drawings |
Facing | RF, RTJ, FF where specified |
Field | Requirement |
Dimensions | NPS/DN, bore, pipe wall or schedule |
Rating | Applicable class and pressure-temperature criteria |
Joint | Face type, gasket compatibility, bolting |
Standard | ASME/EN and edition; B16.47 A/B where needed |
Documentation | MTC, heat no., inspections as specified |

Pipeline connections, processing facilities and industrial piping systems.

Process piping, pressure equipment connections and refinery infrastructure.

Transmission pipelines, pumping stations and water treatment facilities.

Steam, utility and plant piping connections according to project specifications.

Specialised flange materials for marine and offshore piping applications.

Bulk flange procurement and project-specific piping material packages.
At QPS, we understand that flange procurement requires close attention to dimensional standards, material grades, pressure classes, facing types and project documentation.
Our team supports industrial buyers with standard and specialised flange requirements, helping simplify material sourcing through technical product knowledge, responsive communication and coordinated supply arrangements.
Weld Neck, Blind, Slip-On, RTJ and specialised configurations.
Support for ASME B16.47 Series A and Series B enquiries.
Carbon steel, stainless steel, low-temperature and specialised grades.
MTO, BOQ and bulk industrial material enquiries.
Material certificates and inspection requirements reviewed for applicable orders.
Sourcing and delivery coordination for regional project requirements.
ASME B16.5 covers NPS 1/2–24 pipe flanges and flanged fittings, while B16.47 covers specified large-diameter steel flanges from NPS 26–60, with Series A and Series B dimensional options.
Yes. Include the full dimensional standard, class, facing, material grade, NPS and series plus the required quantities and documentation.
No. They require compatible mating surfaces and the correct gasket arrangement and must match the approved joint design.
No. They are distinct forging material specifications, and LF2 includes specified low-temperature toughness requirements.
WhatsApp us