Skip to main content

QPS Dubai

Industrial Pipe Fittings Supplier in Dubai, UAE 

QPS supports industrial pipe-fitting enquiries for carbon steel, alloy steel, stainless steel and specified high-strength grades. From elbows and tees to reducers and caps, these components help piping systems change direction, branch or transition between pipe sizes according to engineering design.

Industrial butt-weld pipe fittings including steel elbows tees reducers and caps supplied by QPS Dubai UAE

Product Overview

Pipe fittings must be selected for compatible end connections, material grades, dimensions and wall thicknesses. Our published range covers long-radius and short-radius elbows, equal/reducing tees, concentric and eccentric reducers, caps, stub ends and return bends, with seamless and welded manufacturing options. Pressure suitability is established by the applicable design code and component specification, not generic performance claims.

OUR PIPE FITTINGS RANGETypes of Industrial Pipe Fittings

QPS supports a wide range of industrial butt-weld pipe fittings designed for directional changes, branching, diameter transitions and piping closures.

Our product range includes seamless and welded configurations in various sizes, wall thicknesses, material grades and applicable dimensional standards to meet demanding project specifications.

Butt-Weld Elbows

45°, 90° and 180° elbows in long-radius and applicable short-radius configurations for changing flow direction.

Equal & Reducing Tees

Branch connections for distributing or combining flow, available in equal and reduced outlet configurations.

Concentric Reducers

Symmetrical tapered fittings for transitions between different nominal pipe diameters.

Eccentric Reducers

Offset reducers designed to provide a flat-side alignment where required by the piping design.

Pipe Caps

Butt-weld end closures for compatible piping systems and pressure applications.

Stub Ends

Components used with compatible lap-joint flange arrangements for suitable piping systems.

MATERIAL EXPERTISEPipe Fittings Materials & Grades

Our pipe fittings range supports industrial systems requiring material strength, corrosion resistance, pressure-temperature performance and compliance with project-specific specifications.

QPS can review enquiries involving carbon steel, stainless steel, low-temperature and high-yield fittings, including specialised material grades for demanding piping applications.

Material selection and product availability depend on the required manufacturing method, dimensions, standards and operating conditions.

Carbon steel

ASTM A234 WPB/WPC; ASTM A420 WPL6 for specified low-temperature work.

High-strength

ASTM A860 WPHY 42/46/52/60/65/70 for applicable fittings.

Stainless steel

ASTM A403 WP304/304L and WP316/316L, subject to product availability.

Dimensional standards

ASME B16.9 for factory-made wrought butt-welding fittings; other standards by fitting type.

Catalogue size illustrations

Legacy brochure lists seamless 1/4–24 in. and welded 26–96 in. ranges; confirm actual type, size and wall.

TECHNICAL SPECIFICATIONSTechnical Specifications — Pipe Fittings

Fitting

Function

Long-radius / short-radius elbows

Change direction in approved radius

Equal / reducing tees

Branch from main run

Concentric reducers

Centreline-aligned diameter transition

Eccentric reducers

Offset diameter transition

Caps

Close an end

Stub ends

Work with lap-joint backing flanges

Category

Indicative specification

Carbon steel

ASTM A234 WPB/WPC

Low-temperature steel

ASTM A420 WPL6

High-yield fittings

ASTM A860 WPHY 42/46/52/60/65/70

Stainless steel

ASTM A403 WP304/304L, WP316/316L

Dimensional standard

ASME B16.9 for applicable butt-weld fittings

End preparation

Per approved piping specification

Standard

Application

ASME B16.9

Factory-made wrought butt-welding fittings

ASME B16.28

Wrought steel short-radius elbows and returns

ASTM A234

Carbon and alloy steel fittings for moderate and elevated temperatures

ASTM A403

Wrought austenitic stainless steel piping fittings

ASTM A420

Carbon and alloy steel fittings for low-temperature service

ASTM A860

High-strength ferritic steel butt-weld fittings

ASTM A815

Wrought ferritic, ferritic/austenitic and martensitic stainless steel piping fittings

TECHNICAL SELECTIONFitting Selection & Configurations

Selecting industrial pipe fittings requires close attention to pipe dimensions, material grade, schedule, operating conditions and connection requirements.

QPS supports technical procurement enquiries involving standard and specialised fitting configurations. Customers can submit piping isometrics, technical datasheets, material take-offs and project specifications for sourcing review.

Requirement

Key Consideration

Direction Changes

45°, 90° or 180° elbows; long or short radius

Branch Connections

Equal or reducing tees

Diameter Transitions

Concentric or eccentric reducers

End Closures

Pipe caps

Flange Connections

Stub ends with compatible lap-joint flanges

Wall Thickness

Pipe schedule or specified nominal thickness

Materials

Grade, temperature and corrosion requirements

INDUSTRIES WE SERVEIndustries & Applications

Oil & Gas

Elbows, tees and reducers for pipeline systems, processing facilities and industrial piping installations.

Petrochemical

Material-specific fittings for refinery and process piping applications.

Water & Desalination

Large-diameter fittings for water transmission, treatment and pumping infrastructure.

Power Generation

Fittings for steam, utility and power plant piping requirements.

Marine & Offshore

Corrosion-resistant and specialised fitting configurations for marine service.

EPC & Infrastructure

Bulk and project-specific pipe fitting packages for engineering and infrastructure works.

WHY QPSWhy Source Industrial Pipe Fittings from QPS?

At QPS, we understand that industrial pipe fitting procurement requires accurate material specifications, compatible dimensions, appropriate manufacturing methods and reliable documentation.

Our sourcing approach supports standard and specialised fitting requirements with technical product knowledge, responsive sales coordination and project-focused supply arrangements.

From individual fittings to large-diameter piping packages, we help contractors, EPC companies, fabricators and industrial buyers simplify procurement across the UAE and GCC.

Elbows, tees, reducers, caps, stub ends and specialised configurations.

Carbon, stainless, low-temperature and high-yield steel requirements.

Support for project-specific welded and fabricated fitting requirements.

Review of ASTM standards, schedules and dimensional requirements.

MTO, BOQ and bulk material supply coordination.

Commercial and logistics support for the UAE, Saudi Arabia and GCC.

FAQFrequently Asked Questions

What kinds of pipe fittings are offered?

Product enquiries may include elbows, tees, concentric/eccentric reducers, caps, return bends and stub ends, in the specified material and dimensions.

Concentric reducers share a common centreline; eccentric reducers have an offset centreline for specific piping arrangements.

ASTM A234 WPB is listed in the QPS product portfolio. Provide the schedule, size, fitting type and specification for sourcing confirmation.

Include product geometry, NPS, wall/schedule, grade, connection end, dimensional standard and drawing/MTO reference.

partnersTrusted collaborators with QPS