
QPS supports industrial pipe-fitting enquiries for carbon steel, alloy steel, stainless steel and specified high-strength grades. From elbows and tees to reducers and caps, these components help piping systems change direction, branch or transition between pipe sizes according to engineering design.
Pipe fittings must be selected for compatible end connections, material grades, dimensions and wall thicknesses. Our published range covers long-radius and short-radius elbows, equal/reducing tees, concentric and eccentric reducers, caps, stub ends and return bends, with seamless and welded manufacturing options. Pressure suitability is established by the applicable design code and component specification, not generic performance claims.
QPS supports a wide range of industrial butt-weld pipe fittings designed for directional changes, branching, diameter transitions and piping closures.
Our product range includes seamless and welded configurations in various sizes, wall thicknesses, material grades and applicable dimensional standards to meet demanding project specifications.

45°, 90° and 180° elbows in long-radius and applicable short-radius configurations for changing flow direction.

Branch connections for distributing or combining flow, available in equal and reduced outlet configurations.

Symmetrical tapered fittings for transitions between different nominal pipe diameters.

Offset reducers designed to provide a flat-side alignment where required by the piping design.

Butt-weld end closures for compatible piping systems and pressure applications.

Components used with compatible lap-joint flange arrangements for suitable piping systems.
Our pipe fittings range supports industrial systems requiring material strength, corrosion resistance, pressure-temperature performance and compliance with project-specific specifications.
QPS can review enquiries involving carbon steel, stainless steel, low-temperature and high-yield fittings, including specialised material grades for demanding piping applications.
Material selection and product availability depend on the required manufacturing method, dimensions, standards and operating conditions.
Carbon steel | ASTM A234 WPB/WPC; ASTM A420 WPL6 for specified low-temperature work. |
High-strength | ASTM A860 WPHY 42/46/52/60/65/70 for applicable fittings. |
Stainless steel | ASTM A403 WP304/304L and WP316/316L, subject to product availability. |
Dimensional standards | ASME B16.9 for factory-made wrought butt-welding fittings; other standards by fitting type. |
Catalogue size illustrations | Legacy brochure lists seamless 1/4–24 in. and welded 26–96 in. ranges; confirm actual type, size and wall. |
Fitting | Function |
Long-radius / short-radius elbows | Change direction in approved radius |
Equal / reducing tees | Branch from main run |
Concentric reducers | Centreline-aligned diameter transition |
Eccentric reducers | Offset diameter transition |
Caps | Close an end |
Stub ends | Work with lap-joint backing flanges |
Category | Indicative specification |
Carbon steel | ASTM A234 WPB/WPC |
Low-temperature steel | ASTM A420 WPL6 |
High-yield fittings | ASTM A860 WPHY 42/46/52/60/65/70 |
Stainless steel | ASTM A403 WP304/304L, WP316/316L |
Dimensional standard | ASME B16.9 for applicable butt-weld fittings |
End preparation | Per approved piping specification |
Standard | Application |
|---|---|
ASME B16.9 | Factory-made wrought butt-welding fittings |
ASME B16.28 | Wrought steel short-radius elbows and returns |
ASTM A234 | Carbon and alloy steel fittings for moderate and elevated temperatures |
ASTM A403 | Wrought austenitic stainless steel piping fittings |
ASTM A420 | Carbon and alloy steel fittings for low-temperature service |
ASTM A860 | High-strength ferritic steel butt-weld fittings |
ASTM A815 | Wrought ferritic, ferritic/austenitic and martensitic stainless steel piping fittings |
Selecting industrial pipe fittings requires close attention to pipe dimensions, material grade, schedule, operating conditions and connection requirements.
QPS supports technical procurement enquiries involving standard and specialised fitting configurations. Customers can submit piping isometrics, technical datasheets, material take-offs and project specifications for sourcing review.
Requirement | Key Consideration |
|---|---|
Direction Changes | 45°, 90° or 180° elbows; long or short radius |
Branch Connections | Equal or reducing tees |
Diameter Transitions | Concentric or eccentric reducers |
End Closures | Pipe caps |
Flange Connections | Stub ends with compatible lap-joint flanges |
Wall Thickness | Pipe schedule or specified nominal thickness |
Materials | Grade, temperature and corrosion requirements |

Elbows, tees and reducers for pipeline systems, processing facilities and industrial piping installations.

Material-specific fittings for refinery and process piping applications.

Large-diameter fittings for water transmission, treatment and pumping infrastructure.

Fittings for steam, utility and power plant piping requirements.

Corrosion-resistant and specialised fitting configurations for marine service.

Bulk and project-specific pipe fitting packages for engineering and infrastructure works.
At QPS, we understand that industrial pipe fitting procurement requires accurate material specifications, compatible dimensions, appropriate manufacturing methods and reliable documentation.
Our sourcing approach supports standard and specialised fitting requirements with technical product knowledge, responsive sales coordination and project-focused supply arrangements.
From individual fittings to large-diameter piping packages, we help contractors, EPC companies, fabricators and industrial buyers simplify procurement across the UAE and GCC.
Elbows, tees, reducers, caps, stub ends and specialised configurations.
Carbon, stainless, low-temperature and high-yield steel requirements.
Support for project-specific welded and fabricated fitting requirements.
Review of ASTM standards, schedules and dimensional requirements.
MTO, BOQ and bulk material supply coordination.
Commercial and logistics support for the UAE, Saudi Arabia and GCC.
Product enquiries may include elbows, tees, concentric/eccentric reducers, caps, return bends and stub ends, in the specified material and dimensions.
Concentric reducers share a common centreline; eccentric reducers have an offset centreline for specific piping arrangements.
ASTM A234 WPB is listed in the QPS product portfolio. Provide the schedule, size, fitting type and specification for sourcing confirmation.
Include product geometry, NPS, wall/schedule, grade, connection end, dimensional standard and drawing/MTO reference.
WhatsApp us